FacebookTwitterLinkedinInstagram

Kunkle Safety & Relief Valves

//Kunkle Safety & Relief Valves
  •

    Kunkle Brass Safety & Pressure Relief & Vacuum Relief Valve Models 912, 913, 918, 919 Certified Valves

    With a brass and sturdy bronze base, these Kunkle 900 series safety valves are built with multiple variations for a more customized use. Certified for air, gas, steam and liquid, these full nozzle designed valves are used for air and gas compressors, pressurized tanks (both gas and liquid), vacuum pumps, vacuum tanks and vacuum equipment, oil and gas separators, and pressure relief systems. Model Description: ASME Section VIII, Air/Gas/Steam/Liquid, “UV” National Board Certified. Also available for vacuum service. PED Certified for non-hazardous gas.
    • Model 912: Full nozzle design. SS warn ring and disc with brass/bronze base. Bronze/brass body and bonnet.
    • Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 stainless steel (SS) trim (base, disc and disc holder).
    • Model 918: Same as Model 912 except resilient seat/seal. Superior “leak-free” performance. FM approved with 316 SS base for fire pump installations in “BDD” and “BDE” sizes.
    • Model 919: Same as Model 913 except resilient seat/seal. Superior “leak-free” performance. Bronze body and bonnet. 316 SS trim (base, disc and disc holder).
    Features:
    • Available with soft seat.
    • Threaded cap is standard (back pressure tight).
    • Hex on valve nozzle provides for easy installation.
    • Warn ring offers easy adjustability.
    • Pivoting disc design corrects misalignment and offers exceptional performance.
    • Guide to nozzle ratio reduces friction.
    • Full nozzle design for optimum flow performance.
    • Threaded side outlet for piped-off discharge to eliminate fugitive emissions.
    Applications:
    • Air/gas compressors, intercoolers, aftercoolers.
    • Liquid filled pressure vessels/systems, ASME Section VIII (UV).
    • Pressure vessels containing gas, air, liquid or steam. Including tanks and receivers.
    • Vacuum systems including pumps, tanks and equipment.
    • Optional materials for low temperature such as cryogenic applications.
    • Oil/gas separators.
    • Overpressure relief and protection of pumps, tanks, lines and hydraulic systems.
    • By-pass relief or pressure regulation.
    Pressure and Temperature Limits:
    • Model 912, 918: Steam
      • 3 to 250 PSIGPSIG [0.2 to 17.2 barg]
      • -320° to 406°F [-195° to 208°C]
    • Models 913, 919: Steam
      • 3 to 300 PSIGPSIG [0.2 to 20.7 barg]
      • -320° to 425°F [-195° to 219°C]
    • Models 912, 918: Air/Gas/Liquid
      • 3 to 300 PSIGPSIG [0.2 to 20.7 barg]
      • -320° to 406°F [-195° to 208°C]
    • Models 913, 919: Air/Gas/Liquid
      • 3 to 1400 PSIGPSIG [0.2 to 96.5 barg]
      • -320° to 425°F [-195° to 219°C]
    Vacuum Limits:
    • 6″ to 29″ HG
    • [200 to 1000 mbarg] – 300°F[149°C]
    Options:
    • Variation 01: Threaded cap
    • Variation 02: Threaded cap with gag.
    • Variation 03: Plain lever.
    • Variation 04: Plain lever with gag.
    • Variation 05: Plain lever with vibration dampener.
    • Variation 06: Packed lever.
    • Variation 07: Packed lever with gag.
    Please refer to the Kunkle Catalog or Contact Us for additional information.
    Details

  • Kunkle Brass Safety Relief Valve Models 541, 542, 548 Certified Valves

    High capacity air and gas certified safety valves, these models are built to support air compressors, intercoolers, aftercoolers, air tanks, air receivers, air lines and systems as well as pressurized equipment. Model Description: ASME Section VIII, Air/Gas, “UV” National Board Certified Safety Valves
    • Model 541: ¼” or ½” male NPT inlet. Brass body and seat with BUNA-N ball or flat seal. Exceptional seat tightness performance.
    • Model 542: Same as Model 541 except Viton® ball or flat seal.
    • Model 548: Same as Model 541 except stainless steel (SS) ball seal.
    Features:
    • High capacity with small size.
    • Factory sealed to prevent tampering or disassembly.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Small-to-medium-size, single- and multi-stage air compressors, intercoolers, aftercoolers, instrument/control air lines and systems.
    • Air tanks/receivers and pressurized equipment.
    Pressure and Temperature Limits:
    • Model 541
      • 3 to 200 PSIG [0.2 to 13.8 barg]
      • -40° to 200°F [-40° to 93°C]
    • Model 542
      • 3 to 200 PSIG [0.2 to 13.8 barg]
      • -10° to 300°F [-23° to 149°C]
    • Model 548
      • 3 to 400 PSIG [0.2 to 27.6 barg]
      • -60° to 400°F [-34° to 204°C]
    Please refer to the Kunkle Catalog or Contact Us for additional information.
    Details

  • Kunkle Brass Safety Valve Model 30 Certified Valve

    For air and gas applications, this brass and stainless steel valve is suitable for small to medium sized compressors, multi-stage compressors, intercoolers, aftercoolers, instrument air lines, control air lines and systems, air tanks, air receivers and pressurized equipment. Model Descriptions: ASME Section VIII Air/Gas, “UV” National Board Certified, Safety Valve Features:
    • Top-guided disc provides optimum performance.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Small-to-medium-size, multi-stage air compressors, intercoolers, aftercoolers, instrument/control air lines and systems.
    • Air tanks/receivers and pressurized equipment.
    Pressure and Temperature Limits:
    • 60 to 4000 PSIG [ 4 to 276 barg]
    • -20° to 300°F [-29° to 150°C]
    Please refer to the Kunkle Model 30 Catalog or Contact Us for additional information.
    Details
  • Kunkle Models 1 & 2

    Kunkle Brass Safety Valve Models 1 & 2 Certified Valves

    Model 1 and 2 have a compact design allowing for usage in small spaces. These valves are certified to work with air, steam and other non-hazardous gas devices such as compressed air tanks, air compressors, gas compressors – both portable compressors and stationary compressors, intercoolers and aftercoolers as well as steam processing equipment like steam generators and steam boilers. Model Detail Descriptions:
    • ASME Section VIII, Air/Gas or Steam, “UV” National Board Certified.
    • Model 1 has a top outlet.
    • Model 2 has a side outlet.
    Features:
    • Compact assembly allows for minimum space requirements.
    • Precision lapped, metal-to-metal beveled seat provides premium shutoff.
    • Warn ring for precise opening, with minimum pre-open or simmer.
    • Top or side outlet available.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Air and non-hazardous gas service.
    • Air/gas compressors — portable or stationary.
    • Pressure vessels — including tanks, receivers, intercoolers, aftercoolers.
    • Steam turbines, kettles, other steam-processing equipment.
    Pressure and Temperature Limits:
    • 5 to 250 PSIG
    • -60° to 406°F
    Options:
    • Variation 03: Nickel plating for use on institutional equipment
    • Variation 02: Vibration dampener on lift lever
    Please refer to the Kunkle Model 1 and 2 Catalog or Contact Us for additional information.
    Details

  • Kunkle Bronze Liquid Relief Valve Models 19, 20, 20M, 20MP, 20P, 200A, 200H

    These sturdy bronze relief valves are used for overpressure relief and protection of pumps, tanks, lines and hydraulic systems, pressure regulation and continuous bypass relief. Non-coded liquid relief valves, all models have stainless steel springs for corrosion resistance. Model Descriptions: Non-code Bronze Liquid Relief Valves
    • Model 19: All bronze; equipped with handwheel for easy adjustment within spring ranges.
    • Model 19M: Same as model 19 except stainless steel (SS) trim (seat and disc). Available 2 ½” and 3” only. For higher pressure settings or severe applications.
    • Model 20: All bronze, with pressure-tight cap. Suitable for maximum back pressure of 50 PSIGPSIG.
    • Model 20M: Same as model 20 except SS trim. Available in 2 ½” and 3” only (seat and disc). For higher pressure settings or severe applications. Maximum back pressure of 50 PSIG.
    • Model 20P: Same as model 20 except has packed lift lever. Suitable for maximum back pressure of 50 PSIG.
    • Model 20MP: Same as model 20M except has packed lift lever. Maximum back pressure of 50 PSIG.
    • Model 200A: Special non-chattering design. Recommended for light oils and continuous by-pass or pressure regulation. UL842 listed for light oil service. Available in ¾” to 1 ½” sizes.
    • Female NPT connections only.
    • Model 200H: Same as Model 20. UL842 listed for use with fuel oils. Available in ¾” to 2” sizes.
    Features:
    • Both inlet and outlet connections are cast integral with body to permit easy inspection and servicing without disconnecting piping.
    • Beveled seats lapped for optimum performance.
    • SS spring for optimum corrosion resistance.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Non-code liquid relief
    • -Overpressure relief and protection of pumps, tanks, lines and hydraulic systems.
    • Pressure regulation.
    • Continuous by-pass relief.
    Pressure and Temperature Limits:
    • Models 19, 20
      • 1 to 300PSIG
      • -60° to 406°F
    • Models 19M, 20M
      • 1 to 500 PSIG
      • -60° to 406°F
    • Models 200A, 200H
      • 1 to 200 PSIG
      • -60° to 406°F
    Options:
    • Available with optional female NPT inlet or flanged inlet and outlet connections.
    • Model 20D
      • Variation 05: 50 to 150 PSIG spring range
      • Variation 06: 100 to 300 PSIG
    Please refer to the Kunkle Catalog or Contact Us for additional information.
    Details

  • Kunkle Bronze Safety Valve Models 189, 189C, 189P, 363, 363C, 363P, 389C, 389P

    Certified for air, gas and cryogenic applications, these bronze valves with stainless steel trim are made with a unique three-piece disc assembly which offers superior leak-free performance over pressure/temperature operating range. Used with cryogenic (cold) and liquefied air, liquefied oxygen and liquefied gas services, multi-stage air compressors, multi-stage gas compressors, intercoolers, aftercoolers and receivers, air, gas and liquefied gas lines and systems. Model Descriptions: ASME Section VIII, Air/Gas Cryogenic, “UV” National Board Certified Safety Valves
    • Model 189: Bronze housing with stainless steel (SS) trim (nozzle and disc) with Teflon® seat/seal in disc. Plain lift lever.
    • Model 189C: Same as Model 189 except pressure-tight cap for gas service only. Suitable for maximum back pressure of 50 PSIG.
    • Model 189P: Same as model 189 except pressure-tight packed lift lever. Suitable for maximum back pressure of 50 PSIG.
    • Model 363: Bronze housing with SS trim (nozzle and disc) with Teflon® seat/seal in disc. Plain lift lever. 1000 PSIG maximum set pressure.
    • Model 363C: Same as Model 363 except pressure-tight cap for gas service only. Suitable for maximum back pressure of 50 PSIG. 1000 PSIG maximum set pressure.
    • Model 363P: Same as Model 363 except pressure-packed lift lever. Suitable for maximum back pressure of 50 PSIG. 1000 PSIG maximum set pressure.
    • Model 389C: All SS with Teflon® seat/seal in disc. Pressure-tight cap for gas service only. Suitable for maximum back pressure of 50 PSIG.
    • Model 389P: Same as Model 389C except pressure-tight packed lift lever. Suitable for maximum back pressure of 50 PSIG.
    Features:
    • Unique three-piece disc assembly (with Teflon® seat/seal) offers superior leak-free performance over pressure/temperature operating range.
    • Warn ring offers precise opening with minimum pre-open or simmer.
    • Pivot between disc and spring corrects for all misalignment and compensates for spring side thrust.
    • All adjustments are factory sealed to prevent tampering and disassembly.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Cryogenic “cold” and liquefied air, oxygen and gas service.
    • Multi-stage air and gas compressors, intercoolers, aftercoolers and receivers.
    • Thermal expansion relief and/or full-rated capacity discharge.
    • Air, gas and liquefied gas lines and systems.
    Pressure and Temperature Limits:
    • Model 189
      • 1000 to 2500 PSIG
      • -320° to 350°F
    • Model 363
      • 50 to 1000 PSIG
      • -320° to 350°F
    • Model 389
      • 50 to 2500 PSIG
      • -320° to 350°F
    Please refer to the Kunkle Catalog or Contact Us for additional information.
    Details

  • Kunkle Bronze Vacuum Relief Valve Model 215V (Non-Code Vacuum) & Kunkle Bronze Safety Valve Model 337 – Certified Valve

    Models 215V and 337 feature a large nozzle design for high capacity applications. Model 337 is certified for air and gas. Both valves are certified for non-hazardous gas. Used with low to medium pressure high-volume blowers, compressors and pneumatic conveying systems. Also used to regulate bulk hauling trailers and bulk hauling equipment, and light gauge tanks. Model Descriptions:
    • Model 215V is Non-code Vacuum Relief Valve.
    • Model 337 is ASME Section VIII Air/Gas “UV” National Board Certified Safety Valve. The valve has “lift-pin” lift device for easy manual testing.
    • Both models are PED Certified for non-hazardous gas.
    Adjustments are factory sealed to help prevent tampering or disassembly. Features:
    • Large nozzle design provides high capacity.
    • Flat bronze valve seats are lapped for optimum performance.
    • Warn ring offers easy adjustability for precise opening with minimum preopen or simmer.
    • Pivot between disc and spring corrects misalignment and compensates for spring side thrust.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Protection of low-to-medium pressure high-volume blowers, compressors and pneumatic conveying systems.
    • Bulk hauling trailers/equipment.
    • Light gauge tanks.
    • Protection of high-volume vacuum pumps and conveying systems.
    Vacuum Limits:
    • Model 215V
      • 2″ Hg to 29″ Hg [67.7 to 982 mbarg]
      • -20° to 406°F [-29° to 208°C]
    Pressure and Temperature Limits:
    • Model 337
      • 1 to 60 PSIG [0.07 to 4.1 barg]
      • -20° to 406°F [-29° to 208°C]
    Option:
    • Variation 03: Stainless steel trim (nozzle and disc).
    Please refer to the Kunkle Catalog or Contact Us for additional information.
    Details

  • Kunkle Cast Iron Liquid Relief Valve Models 91, 218, 228

    Made with cast iron and bronze trim, this tough valve is used with fire pump service (UL and FM approved – models 218 and 228), overpressure relief and protection of pumps, tanks, lines and hydraulic systems. Also good with pressure regulation, optional stainless steel trim available. Model Descriptions: Cast Iron Liquid Relief Valves
    • Model 91: Bronze or stainless steel trim with pressure-tight cap. Suitable for maximum back pressure of 60 PSIG. Variation “03” for field adjustability.
    • Model 218: Bronze or stainless steel trim. UL and FM approved for fire pump installations. Special design offers minimum set pressure of 60 PSIG. Easily adjustable with handwheel to 200
    • PSIG (175 PSIG with optional 125# inlet flange).
    • Model 228: Bronze or stainless steel trim with pressure-tight cap. UL and FM approved for fire pump installations. Suitable for maximum back pressure of 60 PSIG. Supplied with handwheel.
    Features:
    • Bolted bonnet permits easy inspection and servicing without removal from system.
    • Quality cast iron body and bonnet, insert and disc are available in either bronze or stainless steel (SS) and lapped for optimum performance.
    • Springs are steel with plating for corrosion protection.
    • High lift, wing-guided disc offers high relieving capacity. Pivot between disc and spring corrects misalignment and compensates for spring side thrust.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Fire pump service, UL 1478 listed and FM approved (Models 218, 228).
    • Overpressure relief and protection of pumps, tanks, lines and hydraulic systems.
    • Pressure regulation.
    Pressure and Temperature Limits:
    • Model 91
      • 5 to 400 PSIG
      • -20° to 406°F
    • Models 218, 228
      • 60 to 200 PSIG
      • -20° to 406°F
    Options:
    • Variation 02: SS trim (insert and disc).
    • Female x female NPT connections (1 1/2“ to 4” sizes).
    • Inlet and outlet flanges per ANSI B16.1-125#. Limited to 175 PSIG maximum set pressure.
    • Epoxy-coated internal body and bonnet. Temperature limit 125°F [52°C].
    Please refer to the Kunkle Catalog or Contact Us for additional information.
    Details

  • Kunkle Cast Steel Safety Valve Models 300, 600 Certified Valves

    Forged from heavy-duty cast steel with a stainless steel nozzle, these safety valves are certified for air, gas and steam. Used in steam boilers, steam generators, air compressors, gas compressors, pressure tanks, pressure receivers, intercoolers, and oil/gas separators, these sturdy valves contain a bolted yoke design for easy maintenance. Model Descriptions: ASME Section I Steam and ASME Section VIII Air/Gas/Steam Valves
    • Model 300: Cast steel, exposed spring, full nozzle with stainless steel (SS) trim. ANSI 300# inlet flange and 150# outlet flange.
    • Model 600: Cast steel, exposed spring, full nozzle with SS trim. ANSI 600# inlet flange and 150# outlet flange.
    Features:
    • Heavy-duty construction of high-quality cast steel with SS full-nozzle trim for optimum performance.
    • Bolted yoke design for easy maintenance.
    • Steel yoke incorporates cover shield for guiding surfaces and provides for fully exposed spring.
    • Seats lapped to optical flatness for tight shutoff.
    • Dual control rings offer easy adjustability for precision opening with minimum pre-open or simmer and exact blowdown control.
    • Adjustments are factory sealed to help prevent tampering or disassembly.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Steam boilers and generators.
    • Pressure-reducing stations.
    • Air/gas compressors — reciprocating or rotary.
    • Pressure vessels — including tanks, receivers, intercoolers, oil/gas separators, lines.
    Please refer to the Kunkle Catalog or Contact Us for additional information.
    Details

  • Kunkle Liquid Relief Valve Models 264, 264P, 265, 265P, 266, 266P, 267, 267P

    Certified for Air, Gas and Steam applications, non-code for liquid, these valves are made with carbon steel, and stainless steel trim. Used to protect pumps, compressors, pressure vessels or for systems handling corrosive fluids or vapors at high pressure or temperature. Valve also serves as a warning (sentinel) on steam equipment. Ball bearing pivot between disc and spring corrects misalignment and compensates for spring side thrust. Model Descriptions: Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified Safety and Relief Valves.
    • Model 264: Carbon steel housing with 316 stainless steel (SS) trim (nozzle and disc), SS spring. Pressure-tight cap.
    • Model 264P: Same as model 264 with pressure-tight packed lift lever.
    • Model 265: Same as model 264 except high-temperature alloy spring (temperatures to 750°F [400°C]).
    • Model 265P: Same as model 265 with pressure-tight packed lift lever.
    • Model 266: Same as model 264 except 316 SS materials.
    • Model 266P: Same as model 266 with pressure-tight packed lift lever.
    • Model 267: Same as model 266 except high-temperature alloy spring (temperatures to 750°F [399°C]).
    • Model 267P: Same as model 267 with pressure-tight packed lift lever.
    Features:
    • Top-guided design offers high capacity with 0.110 in² [ 0.710 cm²] orifice area.
    • Ball pivot between disc and spring corrects misalignment and compensates for spring side thrust.
    • Standard outlet with 1” female NPT.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Protection of pumps, compressors, pressure vessels or systems handling corrosive fluids or vapors at high pressure and/or temperature.
    • Sentinel (warning) on steam equipment.
    Pressure and Temperature Limits:
    • Model 264
      • 4 to 3300 PSIG [0.28 to 227 barg]
      • -20° to 550°F [-29° to 288°C]
    • Model 266
      • 4 to 3300 PSIG [0.28 to 227 barg]
      • -320° to 550°F [-195° to 288°C]
    • Model 265
      • 4 to 3300 PSIG [0.28 to 227 barg]
      • -20° to 750°F [-29° to 399°C]
    • Model 267
      • 4 to 3300 PSIG [0.28 to 227 barg]
      • -320° to 750°F [-195° to 316°C]
    Note: Pressures listed are for female NPT inlets only. See chart on page 5 of the applicable Kunkle Catalog for male NPT. Please refer to the Kunkle Catalog or Contact Us for additional information.
    Details

  • Kunkle Model 930 Certified Safety Relief Valve

    This high capacity steam safety relief valve is built to handle low-pressure steam heating boilers such as hot water heaters or industrial office space boilers. Utilized by residential, commercial and manufacturing, this high capacity safety relief valve is durable and sturdy.
    Model Description:
    ASME Section IV “Steam” Standard, “HV,” National Board Certified. Features:
    • Extra-high capacity for industrial, commercial and residential low-pressure steam heating boilers.
    • Large seat area/guide area ratio and disc pivot design ensure optimum valve performance.
    • Lapped valve seats for optimum performance.
    • Reversible lift lever for “pull-up” or “pull-down” manual testing.
    • Adjustments are factory sealed to prevent tampering or disassembly.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Low-pressure steam heating boilers ASME Code Section IV.
    Pressure and Temperature Limits:
    • 15 PSIG only [1 barg]
    • 250°F [121°C]
    Please refer to the Kunkle 930 Catalog or Contact Us for additional information.
    Details

  • Kunkle Pressure Relief Valve Models 330, 330S, 333S Certified Valves, Model 230 (Non-Code)

    Made with aluminum, these valves are certified for non-hazardous gas. Used with multi-stage high-pressure compressors, intercoolers and aftercoolers, High pressure receivers and storage bottles as well as thermal expansion relief, these lightweight valves aluminum parts are anodized for corrosion resistance making this valve resistant to both environmental and internal corrosion.
    Model Descriptions:
    ASME Section VIII, Gas, “UV” National Board Certified. PED Certified for non-hazardous gas.
    • Model 230: ¼” male NPT – 300/1500 PSIG.
    • Model 330: ¼” male NPT – 1000/5500 PSIG. Aluminum housing, stainless steel (SS) trim (seat and disc with synthetic insert). Sidewall discharge.
    • Model 330S: Same as Model 330 except SS body suitable for 1000/6500 PSIG.
    • Model 333S: Same as Model 330S except ¼” female NPT side outlet. Pressure-tight cap.
    Features:
    • Lightweight aluminum construction. Resistant to environmental and internal corrosion.
    • Model 230 (non-code) has direct spring-loaded design with synthetic disc insert.
    • Model 330 series incorporates a differential mechanism that maintains a predetermined seat-contact load.
    • The full spring load is never imparted to synthetic disc insert (Models 330, 330S and 333S only).
    • Seat tightness increases to maximum as inlet pressure approaches the opening pressure.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Multi-stage high-pressure compressors, intercoolers and aftercoolers.
    • High-pressure receivers and storage bottles.
    • Thermal expansion relief.
    Pressure and Temperature Limits:
    • Model 230
      • 300 to 1500 PSIG [20.6 to 103.4 barg]
      • -20° to 185°F [-28.9° to 85°C]
    • Model 330
      • 1000 to 5500 PSIG [68.9 to 379.2 barg]
      • -20°to 185°F [28.9° to 85°C]
    • Model 330S
      • 1000 to 6500 PSIG [68.9 to 448.1 barg]
      • -20°to 185°F [28.9° to 85°C]
    • Model 333S
      • 1000 to 6500 PSIG [68.9 to 448.1 barg]
      • -20°to 185°F [28.9° to 85°C]
    Please refer to the Kunkle Catalog or Contact Us for additional information.
    Details

  • Kunkle Pressure Relief Valve Models 6010, 6021, 6030, 6121, 6130, 6182, 6186, 6221, 6230, 6283 Certified Valves

    The 6000 series Kunkle valves are popular with air, gas and steam applications. Valve housing is a heavy duty casting. These bronze and stainless steel valves are used with steam boilers, steam generators, air compressors, gas compressors – both reciprocating and rotary, intercoolers and aftercoolers, pressurized steam autoclaves, pressurized steam sterilizers, and pressure reducing stations. Model variations allow for more customized applications. Model Detail Descriptions: ASME Section I and VIII, Steam, ‘V’ and ‘UV’, ASME Section VIII, Air/Gas ‘UV’ National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, ‘Steam’, ‘HV’ National Board Certified.
    • Model 6010: Side outlet. Full nozzle design with brass/bronze trim. Available with O-ring seats.
    • Model 6021: Same as Model 6010 with Teflon (PFA) disc insert. (use on steam only).
    • Model 6030: Same as Model 6010 except SS trim (nozzle and disc). Available with O-ring seats.
    • Model 6182: Top outlet. Full nozzle design with bronze/brass trim. Available with O-ring seats.
    • Model 6121: Same as Model 6182 with Teflon (PFA) disc insert.
    • Model 6130: Same as Model 6182 except SS trim (nozzle and disc). O-ring seat available.
    • Model 6186: Top outlet. Full nozzle design with bronze/brass trim. 150 psig maximum set pressure. Replaces Model 86 (original equipment only).
    • Model 6283: Side outlet. Full nozzle design bronze/brass trim.
    • Model 6221: Same as Model 6283 with Teflon (PFA) disc insert. (Use on steam only).
    • Model 6230: Same as Model 6283 except SS trim (nozzle and disc).
    • Model 6933: Same as Model 6010 except certified for ASME Section IV. Low pressure steam heating boilers set at 15 psig only.
    • Model 6934: Same as Model 6021 except certified for ASME Section IV. Low pressure steam heating boilers set at 15 psig only.
    • Model 6935: Same as Model 6030 except certified for ASME Section IV. Low pressure steam heating boilers set at 15 psig only.
    Features:
    • O-ring seats available for exceptional leak-free performance, reduced maintenance cost, multiple cycles with tight shutoff, improved seating integrity.
    • Wide hex on valve nozzle provides wrenching service clearance for easy installation.
    • Dual control rings offer easy adjustability for precise opening with minimum preopen or simmer and exact blowdown control.
    • Ball bearing pivot between disc and spring corrects misalignment and compensates for spring side thrust.
    • Grooved piston model disc reduces sliding area and friction.
    Pressure and Temperature Limits:
    • Models 6010, 6021, 6182, 6283, 6221
      • Section I Steam 15 to 250 psig -60° to 406°F
      • Non-code and Section VIII Steam, Air/Gas 3 to 250 psig -60° to 406°F
    • Models 6030, 6130, 6230
      • Section I Steam 15 to 300 psig -60° to 425°F
      • Non-code and Section VIII Steam, Air/Gas 3 to 250 psig -60° to 406°F
    Applications:
    • Steam boilers and generators
    • Air/Gas compressors – reciprocating or rotary – portable or stationary, intercoolers and aftercoolers.
    • Pressure Vessels – containing steam, air or non-hazardous gas. Including tanks, receivers, sterilizers and autoclaves.
    • Pressure Reducing Stations – protection of the discharge or low pressure side of system
    Options:
    • Optional O-Ring Soft Seat Where Indicated
    Please refer to the Kunkle 6000 Series Catalog or Contact Us for additional information.
    Details

  • Kunkle Relief Valve Models 803, 818

    Models 803 and 818 can be used for air and gas applications – small to medium sized air compressors, multi-stage air compressors, single air compressors, intercoolers, aftercoolers, instrument air lines, control air lines and systems, air tanks air receivers and pressurized equipment. Valves are made from corrosive resistant aluminum (803) and stainless steel (818). Model Description: Non-code Air/Gas Relief Valves Features:
    • Factory-sealed to prevent tampering or disassembly.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Small-to-medium-size, single- and multi-stage air compressors, intercoolers, after coolers, instrument/control air lines and systems.
    • Air tanks/receivers and pressurized equipment.
    Pressure and Temperature Limits:
    • Model 803
      • 1000 to 6000 PSIG
      • -20° to 185°
    • Model 818
      • 120 and 150 PSIG
      • -20° to 300°F
    Please refer to the Kunkle Catalog or Contact Us for additional information.
    Details

  • Kunkle Safety & Relief Valve Model 537 Certified Valve

    Built to support low pressure steam devices, heat exchangers, hot water boilers and hot water generators, the model 537 safety relief valve is made from durable brass and bronze, providing longer life and exceptional durability. This valve serves a dual purpose of relieving overpressure created by thermal expansion under normal “on and off” firing conditions and overpressure in the form of water or steam created in over-firing due to failure of electrical and other controls. Model Description: ASME Section IV, Low Pressure Steam and Hot Water Boilers, “HV” National Board Certified Safety Relief Valve Features:
    • Extra-heavy construction helps provide long life.
    • Top-guided disc assembly incorporates resilient seal in seating area.
    • An isolating diaphragm protects working parts from corrosion caused by discharged liquid.
    • Pivot between disc and spring designed to correct for misalignment and compensates for spring side thrust.
    • This safety relief valve relieves (1) overpressure created by thermal expansion under normal “on” and “off” firing conditions, and (2) water or steam overpressure created in over-firing due to
    • failure of electrical or other controls.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Hot water boiler, heat exchangers and generators.
    Pressure and Temperature Limits:
    • 15 to 160 PSIG
    • -20° to 250°F
    Please refer to the Kunkle Catalog or Contact Us for additional information.
    Details

  • Kunkle Safety & Vacuum Relief Valve Models 910, 911, 916, 917, 920, 921, 927 Certified Valves

    Available with soft seats, these safety and vacuum relief valves can be used with pressure tanks, air compressors, gas compressors, intercoolers, aftercoolers, and liquid filled pressure systems. Made with carbon and stainless steel, and providing exceptional leak-free durability, these 900 series safety relief and vacuum relief valves are PED certified for non-hazardous gas. Model Description:
    • Models 910, 911, 916 and 917 – ASME Section VIII, Air/Gas/GSteam/Liquid, “UV” National Board Certified.
    • Models 920, 921 and 927 – ASME Section I Special use or application, “V” National Board Certified. Also available for vacuum service. PED Certified for non-hazardous gas.
    • Not for use with oxidizing fluids.
    • Models 910, 911, 916 and 917: ASME Section VIII, Air/Gas/Steam/Liquid, “UV” National Board Certified.
    • Model 910: Carbon steel body and bonnet with stainless steel (SS) trim.
    • Model 911: SS construction.
    • Model 916: Same as Model 910 except resilient seat/seals. Superior “leak-free” performance.
    • Model 917: Same as Model 911 except resilient seat/seals. Superior “leak-free” performance.
    • Models 920, 921 and 927: ASME Section I Special use or application, “V” National Board Certified. Also available for vacuum service. PED Certified for non-hazardous gas. Not for use with oxidizing fluids.
    • Model 920: Steel body and bonnet with screwed cap and SS spring for organic fluid vaporizers (ASME Section I-“V” special use or application).
    • Model 921: Steel body and bonnet with plain lift lever and SS spring for forced flow steam generators (ASME Section I-“V” special use or application).
    • Model 927: Steel body and bonnet with packed lift lever and SS spring for high temperature/pressure hot water boilers (ASME Section I-“V” special use or application).
    Features:
    • Available with soft seats.
    • Threaded cap standard (back pressure tight). Maximum back pressure 50 PSIG [3.4 barg].
    • Hex on valve nozzle provides for easy installation.
    • Warn ring offers easy adjustability.
    • Pivoting disc design offers exceptional seat alignment.
    • Guide to nozzle ratio reduces friction.
    • Valve bodies are heavy-duty casting.
    • Full nozzle design for optimum flow performance.
    • Threaded side outlet for piped-off discharge to eliminate fugitive emissions.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Air/gas compressors, intercoolers, aftercoolers.
    • Liquid filled pressure vessels/systems, ASME Section VIII (UV).
    • Vacuum systems, including pumps, tanks and equipment.
    • Pressure vessels containing gas, air, liquid or steam, including tanks and receivers.
    • Oil/gas separators.
    • Overpressure relief and protection of pumps, tanks, lines and hydraulic systems.
    • Bypass relief or pressure regulation.
    • SS Model 911 may be suitable for sanitary/edible applications.
    • Process and industrial corrosive application.
    Please refer to the Kunkle Catalog or Contact Us for additional information.
    Details

  • Kunkle Safety Relief Valve Models 6252 & 6254 Certified Valves

    One of our most popular valves, Kunkle valve 6252 is steam, air and gas certified. Made of cast iron and stainless steel trim, this heavy duty valve is used on steam boilers, steam generators, and pressure reducing steam vessels such as tanks, receivers and oil/gas separators. Kunkle valve 6254 is the same as 6252 plus it is certified for low-pressure steam heating boilers. Model Detail Description: ASME Section I Steam and ASME Section VIII, Air, Steam and Gas “UV” National Board Certified. Model 6254 ASME Section IV “HV,” National Board Certified. PED Certified for Non-Hazardous Gas.
    • Model 6252: Cast iron, enclosed spring, stainless steel (SS) trim.
    • Model 6254: Same as Model 6252 except certified for ASME Code Section IV, Low-pressure Steam Heating Boilers. Set 15 PSIG [1.0 barg] only. J through P orifice only.
    Features:
    • Heavy-duty construction of high-quality cast iron with stainless steel semi-nozzle trim and disc.
    • Bolted bonnet design for easy maintenance.
    • Seats lapped to optical flatness.
    • Dual control rings offer easy adjustability for precision opening with minimum preopen or simmer and exact blowdown control.
    • Heavy-duty lift lever assembly.
    • Adjustments are factory sealed to prevent tampering or disassembly.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Steam boilers and generators.
    • Pressure-reducing stations.
    • Air/gas compressors — reciprocating or rotary.
    • Pressure vessels, including tanks, receivers, intercoolers, oil/gas separators, lines.
    Pressure and Temperature Limits:
    • Model 6252:
      • 10 to 250 PSIG [0.7 to 17.2 barg]
      • -20° to 406°F [-28° to 208°C]
    Please refer to the Kunkle Catalog or Contact Us for additional information.
    Details

  • Kunkle Stainless Steel Liquid Relief Valve Models 71S, 171, 171P, 171S

    Cast iron valve is a durable pressure relief valve. Model 171S is suitable for sanitary and edible applications. This liquid relief valve can also be used with caustic liquid materials. Best used for bypass relief, pressure regulation, overpressure relief of pumps, tanks and hydraulic systems. Model Descriptions: Liquid Relief Valves
    • Model 71S: Cast iron body with stainless steel (SS) seat and disc. Pressure-tight hood.
    • Model 171: Carbon steel (CS) with SS seat and disc. Pressure-tight hood.
    • Model 171P: Same as Model 171 with packed lift lever.
    • Model 171S: All 316 SS construction, including spring. Available with pressure-tight hood or packed lift lever.
    Features:
    • Suitable for back pressure to 50 PSIG.
    • Seats lapped for optimum performance.
    • Ball pivot between disc and spring corrects misalignment and compensates for spring side thrust.
    • SS springs
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Overpressure relief and protection of pumps, tanks, lines and hydraulic systems. Acid, caustic, ammonia and other corrosive liquids requiring iron, steel or SS materials.
    • Pressure regulation.
    • By-pass relief.
    • Model 171S is all 316 SS, potentially suitable for sanitary applications depending on requirements.
    Pressure and Temperature Limits:
    • Model 71S
      • 1 to 250 PSIG
      • -20° to 406°F
    • Models 171, 171P, 171S
      • 1 to 400 PSIG
      • -20° to 550°F
    Please refer to the Kunkle Catalog or Contact Us for additional information.
    Details

  • Kunkle Stainless Steel Sentinel Steam Relief Valve Models 40R, 40RL

    This non-code steam relief valve is made from durable stainless steel. Used as an audible warning (sentinel) valve on steam equipment, this valve is not meant for pressure relief. Used on steam turbines, these valves springs are made with high temperature alloy steel for stability at super heated temperatures. Model Descriptions: Non-code Steam Service, Sentinel Relief Valves
    • Model 40R: ½” or ¾” male NPT inlet with top discharge to give visible warning of system overpressure. Overall height: 5 ¼”. Weight: 1#.
    • Model 40RL: Same as 40R with plain left lever. Overall height: 6 ½”. Weight: 1 ¼#.
    Features:
    • All parts are stainless steel (SS).
    • Precision-lapped beveled seats for optimum performance.
    • Pivot between spring and disc corrects misalignment and compensates for spring side thrust.
    • Each Kunkle valve is tested and inspected for pressure setting and leakage.
    Applications:
    • Sentinel (warning) on steam equipment. Intended as audible warning device, not for pressure relief.
    • Steam turbines.
    Pressure and Temperature Limits:
    • 1 to 400 PSIG
    • -60° to 850°F
    Please refer to the Kunkle Model 40R and 40RL Catalog or Contact Us for additional information.
    Details