TRAC Style ‘H’

The TRAC Style ‘H’ pressure reducing valve is a self-contained, spring-loaded, direct-operated device for regulating and reducing high-pressure water to any desired operating pressure within the valve’s field adjustable range. The design, construction and materials utilized for the TRAC Style ‘H’ pressure reducing valve are ideally suited for shipboard seawater systems service.

TRAC Style ‘H’ product specifications:

Materials: Bronze Body – Extra Heavy Construction, Monel Trim

Sizes: .25" – 6"

End Connections:

• Union End Sil-Braze I/A/W MIL-F-1183
• Union End I/A/W NAVSEA 803-1385946
• Flanged I/A/W MIL-F-20042, NAVSEA 803-1385947, ANSI B16.24 or ANSI B16.5

Service:

• MIL-V-2042B, MIL-V-2042D and MIL-V-2042E
• ASTM F 1370 Type I and Type II, Series 150, 250 and 700

Pressure Ratings: 150 PSIG – 700 PSIG

Please refer to the TRAC Style 'H' Catalog or Contact for additional information.

TRAC Style 'H' product features:

• Accurate Control
• Packless
• Tight Closing
• Guided Top and Bottom
• Pressure Balance Design for Good Regulation
• Nongalling Guide Surfaces
• Micro-Finished Guide Surface
• Shock and Vibration Tested

The Style ‘H’ pressure reducing valve is available in two variations: Type I and Type II. Type I valves feature a pressure-tight body, spring chamber and bottom cap that forms a pressure-tight envelope capable of withstanding the full-proof pressure rating. In Type II valves, the spring chamber does not form part of the pressure-containing envelope. If no valve type is specified on an order, or if the purchaser has no preference, Type II will be provided.

The TRAC Style ‘H’ pressure reducing valve is a direct replacement (regarding fit and function) for the following manufacturers’ designations (MIL-V-2042D and later specifications): Atlas Valve Company Figure 1910, Charles M Bailey (CMB Industries) Model 30, ITT Lawler Type 2707, Leslie Controls Inc. Class WWBN, Warren Controls Corp. Type 436.

Detailed maintenance instructions for the TRAC Style ‘H’: TRAC Style ‘H’ Commercial Manual H1

Back to Top

TRAC Style ‘HA’

The TRAC Style ‘HA’ pressure reducing valve is a self-contained, spring-loaded, direct-operated device for regulating and reducing high-pressure air or nitrogen to any desired operating pressure within the valve’s field adjustable range. The design, construction and materials utilized for the TRAC Style ‘HA’ pressure reducing valve are ideally suited for shipboard air or nitrogen systems service.

TRAC Style ‘HA’ product specifications:

Materials: Bronze Body – Extra Heavy Construction, Stainless Steel Trim

Sizes: .25" – 2"

End Connections:

• Union End Sil-Braze I/A/W MIL-F-1183

Service:

• Air or Nitrogen MIL-V-24384B Type I, Class A, Design B Series 150

Pressure Rating: 150 PSIG

Please refer to the TRAC Style 'HA' Catalog or Contact for additional information.

TRAC Style 'HA' product features:

• Accurate Control
• Packless
• Tight Closing
• Guided Top and Bottom
• Pressure Balance Design for Good Regulation
• Nongalling Guide Surfaces
• Micro-Finished Guide Surface
• Shock and Vibration Tested

The TRAC Style ‘HA’ pressure reducing valve is intended for installation in air or nitrogen systems where the inlet pressure to the valve is 150 PSIG (or below) and it is required to maintain a constant (within the accuracy limits specified) lower pressure downstream of the valve. For air or nitrogen service applications having an inlet pressure rating higher than 150 PSIG, consider the TRAC Style ‘HG’ gas pressure reducing valve.

For air or nitrogen service applications requiring a pilot-operated pressure reducing valve, consider the TRAC Style ‘RA’ pressure reducing valve.

Detailed maintenance instructions for the TRAC Style 'HA': TRAC Style 'HA' Commercial Manual HA1

Back to Top

TRAC Style 'HG'

The TRAC Style ‘HG’ pressure reducing valve is a self-contained, spring-loaded, direct-operated device for regulating and reducing high-pressure air or nitrogen to any desired operating pressure within the valve’s field adjustable range. The design, construction, and materials utilized for the TRAC Style ‘HG’ pressure reducing valve are ideally suited for shipboard air or nitrogen systems where the required rate of pressure is over 150 PSIG and/or the required end connections are other than MIL-F-1183.

TRAC Style ‘HG’ product specifications:

Materials: Bronze Body – Extra Heavy Construction, Stainless Steel Trim

Sizes: .25" – 2"

End Connections:

• Union End Sil-Braze I/A/W MIL-F-1183
• Union End NAVSEA 803-1385946

Service:

• Gas MIL-V-2961D Type I, Class 1, Body A

Pressure Ratings: 400 PSIG and 600 PSIG

Please refer to the TRAC Style 'HG' Catalog or Contact for additional information.

TRAC Style 'HG' product features:

• Accurate Control
• Packless
• Tight Closing
• Guided Top and Bottom
• Pressure Balance Design for Good Regulation
• Nongalling Guide Surfaces
• Micro-Finished Guide Surface
• Shock and Vibration Tested

The TRAC Style ‘HG’ pressure reducing valve is intended for installation in air or nitrogen systems where the inlet pressure to the valve is 150 PSIG or above. For air or nitrogen service applications having an inlet pressure rating lower than 150 PSIG, consider the TRAC Style ‘HA’ air and gas pressure reducing valve. For air or nitrogen service applications requiring a pilot-operated pressure reducing valve, consider the TRAC Style ‘RA’ pressure reducing valve.

Detailed maintenance instructions for the TRAC Style 'HG': TRAC Style 'HG' Commercial Manual HG1

Back to Top

TRAC Style 'R'

The TRAC Style ‘R’ steam pressure reducing valve is an internal pilot and internally ported valve utilized for regulating and reducing high-pressure steam to any desired operating pressure within the valve’s field adjustable range. The Style ‘R’ valve requires no external source of power to operate the valve or to detect changes in outlet steam pressure.

TRAC Style ‘R’ product specifications:

Materials: Bronze or Steel Body, Stainless Steel Internals

Sizes: 0.5" – 2"

End Connections:

• Flanged, MIL-F-20042 (100 PSIG) or ANSI-F16.5 (150 PSIG)

Service:

• MIL-V-17848C Class A, Composition D
• MIL-V-19772A / MIL-DTL-19772B Type IV Series 100 and Series 150 (Modified- Temperature Signal Feedback Circuit Removed)

Pressure Rating: 150 PSIG

Please refer to the TRAC Style 'R' Catalog or Contact for additional information.

TRAC Style 'R' product features:

• Fully Guided Main Valve
• Renewable, Interchangeable Parts
• Packless
• Sensitive Diaphragm
• Accurate Regulation

The Style ‘R’ valve is intended for installation in low-pressure steam systems such as preheaters, laundry equipment and galley equipment. The inlet pressure rating of the Style ‘R’ valve is 150 PSIG, and the outlet set pressure is adjustable from 15 to 135 PSIG. The valve requires at least a 15 PSI pressure difference between steam supply pressure and maximum regulated pressure. It can be adjusted to limit maximum output pressure to any value from 15 PSI below supply pressure down to 5 PSI gauge pressure.

Detailed maintenance instructions for the TRAC Style 'R': TRAC Style 'R' Commercial Manual R1

Back to Top

TRAC Style 'RA'

The TRAC Style ‘RA’ pressure reducing valve is an internal pilot and internally ported valve utilized for regulating and reducing high-pressure air or nitrogen to any desired operating pressure within its adjustable range. The Style ‘RA’ valve requires no external source of power to operate the valve or to detect changes in outlet pressure.

TRAC Style ‘RA’ product specifications:

Materials: Bronze or Steel Body, Stainless Steel Internals

Sizes: 0.5" – 2"

End Connections:

• Flanged, MIL-F-20042 (100 PSIG) or ANSI-F16.5 (150 PSIG)

Service:

• MIL-V-24384B, Type I, Class C, Design B, Series 150

Pressure Rating: 150 PSIG

Please refer to the TRAC Style 'RA' Catalog or Contact for additional information.

TRAC Style 'RA' product features:

• Fully Guided Main Valve
• Renewable, Interchangeable Parts
• Stainless Internals
• Packless
• Sensitive Diaphragm
• Accurate Regulation

The Style ‘RA’ valve is suitable for shipboard systems intended to regulate air with tighter droop characteristics than self-contained, spring-loaded, direct-operated pressure reducing valves. The inlet pressure rating of the Style ‘RA’ valve is 150 PSIG, and the outlet set pressure is adjustable from 15 to 135 PSIG. The valve requires at least a 15 PSI gauge pressure difference between air supply pressure and maximum regulated pressure. It can be adjusted to limit maximum output pressure to any value from 15 PSI below supply pressure down to 5 PSI gauge pressure.

The Style ‘RA’ valve is similar in design and construction to the Style ‘R’ valve with the internal trim modified specifically for air service. Tight shutoff is assured with the incorporation of the soft-seat arrangement.

Detailed maintenance instructions for the TRAC Style 'RA': TRAC Style 'RA' Commercial Manual RA1

Back to Top