Kunkle Models 6010, 6021, 6030, 6121, 6130, 6182, 6186, 6221, 6230, 6283, 6933, 6934, 6935

Model Description:

ASME Section I and VIII, Steam, “V” and “UV,” ASME Section VIII, Air/Gas “UV” National Board Certified.  Models 6933, 6934 and 6935 are ASME Section IV, “Steam” “HV” National Board Certified.  PED Certified for Non-Hazardous Gas.

• Model 6010: Side outlet. Full nozzle design with bronze/brass trim.  Available with O-ring seats.  For exceptional leak-free performance.
• Model 6021: Same as Model 6010 with Teflon® (PFA) disc insert. For exceptional leak-free performance (steam use only).
• Model 6030: Same as Model 6010 except stainless steel (SS) trim (nozzle and disc). Available with O-right seats for exceptional leak-free performance.
• Model 6121: Same as Model 6182 with Teflon® (PFA) disc insert. For exceptional non-leak performance (steam use only).
• Model 6130: Same as Model 6182 except SS trim (nozzle and disc). O-ring seat available for exceptional leak-free performance.
• Model 6182 : Top outlet. Full nozzle design with bronze/brass trim. O-ring seat available for exceptional leak-free performance.
• Model 6186: Top outlet. Full nozzle design with bronze/brass trim. 150 PSIG [10.3 barg] maximum set pressure. Replaces Model 86 (original equipment only).
• Model 6221: Same as Model 6283 with Teflon® (PFA) disc insert. For exceptional leak-free performance (steam use only).
• Model 6230: Same as Model 6283 except SS trim (nozzle and disc).
• Model 6283: Over-sized side outlet. Full nozzle design bronze/brass trim.
• Model 6933: Same as Model 6010 except certified for ASME code Section IV. Low-pressure steam heating boilers set at 15 PSIG [1.0 barg] only.
• Model 6934: Same as Model 6021 except certified for ASME code Section IV. Low-pressure steam heating boilers set at 15 PSIG [1.0 barg] only.
• Model 6935: Same as Model 6030 except certified for ASME code Section IV. Low-pressure steam heating boilers set at 15 PSIG [1.0 barg] only.

Features:

• O-ring seats available exceptional leak-free performance, reduced maintenance cost, multiple cycles with tight shutoff, improved seating integrity.
• Wide hex on valve nozzle provides wrenching service clearance for easy installation.
• Dual control rings offer easy adjustability for precise opening with minimum preopen or simmer and exact blowdown control.
• Pivot between disc and spring corrects misalignment and compensates for spring side thrust.
• Grooved piston model disc reduces sliding area and friction.
• Each Kunkle valve is tested and inspected for pressure setting and leakage.

Applications:

• Steam boilers and generators.
• Air/gas compressors -- reciprocating or rotary, portable or stationary, intercoolers and aftercoolers.
• Pressure vessels containing steam, air or non-hazardous gas. Including tanks, receivers, sterilizers and autoclaves.
• Pressure reducing stations -- protection of the discharge or low-pressure side of system.

Pressure and Temperature Limits:

• Models 6010, 6021, 6182, 6283, 6221
• Steam service
• 3 to 250 PSIG [0.2 to 17.2 barg]
• -60° to 406°F [-51° to 208°C]
• Air/Gas Service
• 3 to 300 PSIG [0.2 to 20.7 barg]
• -60° to 406°F [-51 to 208°C]
• Models 6030, 6130, 6230
• Steam and air/gas service
• 3 to 300 PSIG [0.2 to 20.7 barg]
• -60° to 425°F [-51 to 218°C]

Please refer to the Kunkle Catalog or Contact for additional information.